12 kVA of firm power with one moving part
The MTG12 is our flagship single-phase microturbine genset, in production and deployed on off-grid sites across Europe, Africa and the Middle East. It runs the liquid fuel you already supply, needs one service visit a year, and is quiet enough to site next to people.
New to the technology? What a microturbine is and how it works explains the cycle, the single moving part and the air bearing before you read the specification.

Moving part
Less particulates
Service visit
The MTG12 runs every fuel below on the same machine, with no hardware change and in any blend ratio. Switch fuel as price, supply and regulation move - the service interval and design life do not change.
Gaseous fuels - biogas, lpg, natural gas, flare gas, hydrogen, ethanol, bioethanol - are in active development, enabled by the modular combustor architecture.
Sites drawing up to roughly 12 kW continuous.
Both units operate across -20°C to +50°C, subject to the Cold Pack or Hot Pack kit. Each unit has its own rated condition: the MTG12 is rated at 15°C (ISO standard reference conditions), and the MTP40 is rated at 25°C. Separately, ISO 8528 standard reference conditions are defined as 15°C, 1,013 mbar and 60% relative humidity, and output de-rating applies for altitude and for temperature above those reference conditions. An alternative battery specification may be recommended for sustained high-ambient operation. Tell us your site conditions and we will confirm the rating you can expect.
Diesel, kerosene, paraffin, HVO, FAME biofuel, and blends of these in any ratio. No hardware change is needed to switch between them, and performance, service interval and design life are unchanged.
One service visit per year. There is one moving part and no oil to change - the unit runs on air bearings - against a diesel genset's typical monthly or 300 run-hour interval.